Bulk SMS Sender

« SMS API (v. 2.0)

Usage examples


Atomic SMS Sender API (v.3.0)

Overview

To activate API 3.0. usage, please login Atomic SMS Sender accout and in the Settings section -> Atomic SMS Sender tab choose “Yes” in the Active API 3.0.

Note! Unlike the XML interface in API 3.0 the test mode is activated by transferring the test=1 parameter. Please note that the current parameter is also used in the checksum generating, if exists.

API Usage Basics

To use API methods means to send an HTTP-request to the URL like:
http://api.atompark.com/sms/3.0/METHOD?key=public_key&sum=CONTROL_SUM&arg1=ARG_1&argN=ARG_N

where

METHOD *

The name of the method

KEY *

The public key to access API

SUM*

The control request sum

ARG_1 ... ARG_N

The method arguments, separated for each method

*All the required parameter are marked with *


The parameters can be transmitted by GET and POST methods, and all the parameters must be in UTF-8 encoding. It is recommended that you transmit all the parameters using the POST method to avoid saving them in the proxy server logs.
To calculate the control sum, you must:

  1. Sort all the incoming keys
  2. Make a concatenation value over those keys
  3. Make a concatenation over received value with a private key
  4. Take an MD5 from the received result

The response will be in a JSON format object.

You can specify the public and private keys on the service settings page.

Below is an example of sum calculation for the addAddressbook method using the PHP language.

$params ['version'] ="3.0";
$params ['action'] = "addAddressbook";
$params [‘key’] = $openKey; //you open key
$params [‘name’] = “Test addressbook”;
$params [‘description] = “Test description”;
ksort ($params);
$sum='';
foreach ($params as $k=>$v) 
$sum.=$v;
$sum .= $privateKey; //your private key
$control_sum =  md5($sum);

Successful method call results

If the method call succeed, the object will contain “result” field, the content of which depends on the called method, and will not contain “error” field. But even when the method run successfully, the “warnings” field may appear, containing a package of warning objects with one-line “warning” field.

Successful method call response example:

{
   "result":{
      "id":18628,
      "name":"TEST NAME ADRESSBOOK",
      "phones":0,
      "exceptions":0,
      "creationdate":"2012-04-01 18:44:36",
   }
} 

Error response example

The error criterion after the method running is the existence of an “error” field. It contains an HTML error message in the response object. Additionally, there will be a “code” field with an error code in the response object. The "result" field will be ignored in case of error.

{
   "error":"Wrong public key.",
   "code":"-1",
   "result":"false"
} 
 

Methods

Address Book Operations

The Address Book is the object consisting of
[id] — The identifier
[name] => Name
[phones] => The quantity of telephone numbers
[exceptions] => The number of excepted telephones
[creationdate] => The date of creation
[description] => The description

To create the Address Book

Method addAddressbook() is used.


Arguments

name*

Address Book name

description

Address Book notes

Request example: URL: http://api.atompark.com/sms/3.0/addAddressbook?key=public_key&sum=control_sum&name=BOOK_NAME&description=BOOK_DESCRIPTION

Response:

{
   "result":{
      "addressbook_id":21620
   }
} 
 

The unique identifier of a new Address Book addressbook_id will be returned in the response.

To delete the Address Book

Method delAddressbook() is used.


Arguments

idAddressBook*

The identifier удаляемой адресной книги

Request example:
URL: http://api.atompark.com/sms/3.0/delAddressbook?key=public_key&sum=control_sum&idAddressBook=21619

Response:
If the transaction is successfully completed the “result” object will contain “successful”: true.


{
   "result":{
      "successful":true
   }
} 
  

If the transaction failed:
In case you are trying to delete an Address Book  that doesn’t exist the server will return

{
   "error":"No addressbook",
   "code":"202",
   "result":"false"
} 

  

To edit the Address Book

Method editAddressbook() is used.
Arguments

idAddressBook*

The identifier of the Address Book to edit

newName*

The Address Book name

newDescr*

The Address Book description

Request example:
URL: http://api.atompark.com/sms/3.0/editAddressbook?key=public_key&sum=control_sum&idAddressBook=21619&newName=name&newDescr=descr

Response:

{
   "result":{
      "successful":true
   }
} 
  

To get the Address Book

Method getAddressbook( ) is used.

Arguments

idAddressBook

The Address Book identifier

from

Вернуть объекты, начиная с позиции from

offset

The number of objects to return

The Address Book return is possible:

  • With the specified  identifier

  Request example:
URL:http://api.atompark.com/sms/3.0/getAddressbook?key=public_key&sum=control_sum&idAddressBook=2161

Response:

{
   "result":{
      "id":2161,
      "name":"super book",
      "phones":25,
      "exceptions":0,
      "creationdate":"2012-04-01 18:44:36",
      "description":null
   }
} 
  • without specified identifier all the Address Books will be returned.

Request example:
URL:http://api.atompark.com/sms/3.0/getAddressbook?key=public_key&sum=control_sum

  • without specified identifier, but with specified offset, all the Address Book that corresponds to the offset will be returned

Request example:
URL:http://api.atompark.com/sms/3.0/getAddressbook?key=public_key&sum=control_sum&from=3&offset=3

Response:

{
   "result":{
      "count":55,
      "fields":[
         "id",
         "name",
         "phone",
         "date",
         "description"
      ],
      "data":[
         [
            "21597",
            "new book",
            "250",
            "2012-01-17 14:57:37",
            ""
         ],
         [
            "18684",
            "testNAME",
            "0",
            "2012-02-06 15:08:16",
            ""
         ],
         [
            "18661",
            "testNAME2",
            "4",
            "2012-03-27 22:45:47",
            ""
         ]
      ]
   }
} 
  

The Address Book search
Method searchAddressBook() is used.

Arguments

searchFields

The “json” format object for the search. The search is possible through the next fields: “name”, “phones”, “date”. These operations can be used during the search: like,=,>,>=,<,<=. The example:

		{
		   "name":{
			  "operation":"like",
			  "value":"test%"
		   }
		}	  

from

To return the objects starting with the “from” position

offset

The number of objects to return

Request example:
URL: http://atompark.com/api/sms/3.0/searchAddressBook?key=public_key&sum=control_sum&from=10&offset=3&searchFields={ "name" : { "operation" : "like" , "value" : "test%" } }

 Response:

{
   "result":{
      "count":50,
      "fields":[
         "id",
         "name",
         "phone",
         "date",
         "description"
      ],
      "data":[
         [
            "18629",
            "test2",
            "0",
            "2012-01-05 16:34:15",
            "tstdescr"
         ],
         [
            "18684",
            "testNAME",
            "0",
            "2012-02-06 15:08:16",
            ""
         ],
         [
            "18661",
            "testNAME",
            "4",
            "2012-01-27 10:45:47",
            ""
         ]
      ]
   }
} 
  


Address book cloning

Method getAddressbook( ) is used.
This method is used to make a copy of an existing address book with a new ID.
Arguments:

idAddressBook*

ID of address book you want to copy

 Request example:
URL: http://api.atompark.com/sms/3.0/cloneaddressbook?key=public_key&sum=control_sum&idAddressBook=147

Response:

{
   "result":{
      "successful":true,
	  "idAddressBook":36107
   }
} 


The phone numbers operations

The phone number is the object composed of:
[id]=> The phone identifier
 [addressbook]=> The Address Book identifier
 [phone]=> The phone number
 [normalphone]=>The phone number according the international standard *
 [variables]=> The variables to personalize, separated by «;» **
 [status]=> The telephone number status

* international standard
** for example: Test1;Test2;Test3

Adding  the phone number to the Address Book


Method addPhoneToAddressBook() is used.
Arguments

idAddressBook*

The Address Book identifier

phone*

The phone number

variables

The variable to personalize

Request example:
URL:http://api.atompark.com/sms/3.0/addPhoneToAddressBook?key=public_key&sum=control_sum&idAddressBook=2432&phone=380638962555&variables=test

Response:

{
   "result":{
      "phone_id":24552302
   }
} 
 

The unique phone number identifier phone_id will be returned.


Add phone numbers to Address Book

Method addPhoneToAddressBook() is used.
Arguments:

idAddressBook*

Address book ID

data*

phones in a JSON format ["Phone number", "Variable"]. Example:[["3806316923xx","Sergey"],["3806316923xx","test"],["3806785214xx"], ["3806785214xx"]]'.

Request example:
URL: http://api.atompark.com/sms/3.0/addPhoneToAddressBook?key=public_key&sum=control_sum&idAddressBook=2432&data=[["38063169xxx1","test1"],["38063169xxx2","test2"],["38063169xxx3","test3"],["38063169xxx3","test4"],["38063169xxx4"],["38063169xxx5","test5"]]

Response:

{
   "result":{
      "successful":true
   }
} 
 


Getting the Address Book

Method getPhoneFromAddressBook() is used.

Arguments

idAddressBook

The Address Book identifier

idPhone

The phone identifier

phone

The phone number

from

To return the objects starting with the “from” position

offset

The number of objects to return

All the arguments are optional.

Request example:
URL: http://api.atompark.com/sms/3.0/getAddressbook?key=public_key&sum=control_sum&idAddressBook=2161

Response:

{
   "result":{
      "count":2,
      "fields":[
         "id",
         "phone",
         "normalPhone",
         "variables",
         "status",
         "code"
      ],
      "data":[
         [
            "24552301",
            "380632587852",
            "380632587852",
            "test variables",
            "0",
            ""
         ],
         [
            "24552302",
            "380632587853",
            "380632587853",
            "test variables",
            "0",
            ""
         ]
      ]
   }
}

  

Request example:
URL:http://api.atompark.com/sms/3.0/getPhoneFromAddressBook?key=public_key&sum=control_sum&idPhone=24552301

Response:

{
   "result":{
      "id":24552301,
      "addressbook":18628,
      "phone":"380632587852",
      "normalphone":"380632587852",
      "variables":"test variables",
      "status":0
   }
} 
  

Deleting phone numbers from the Address Book.

Method delPhoneFromAddressBook() is used.

Arguments:

idAddressBook*

The Address Book identifier

idPhone*

The phone number identifier

In order to delete all the phone numbers it is necessary to specify the Address Book identifier, but to delete a single phone you need to specify the phone number identifier.

 

Request example:
URL: http://api.atompark.com/sms/3.0/delPhoneFromAddressBook?key=public_key&sum=control_sum&idPhone=24552301

Response:


{
   "result":{
      "successful":true
   }
} 
  


Delete a group of phone numbers from the address book

Method delphonefromaddressbookgroup() is used.
Arguments:

idPhones*

phone IDs, comma-separated.
For example, 456, 523, 985, 412.

Request example:
URL: http://api.atompark.com/sms/3.0/delphonefromaddressbookgroup?key=public_key&sum=control_sum&idPhones=456,523,985,412

Response:

{
   "result":{
      "successful":true
   }
} 
 


Editing phone numbers in the Address Book

Method editPhone() is used.
Arguments

idPhone*

The phone identifier

phone*

The phone number

variables*

The variable to personalize

It is necessary to input the new phone number (according to the international standard) and the new line of variables.

Request example:
URL: http://api.atompark.com/sms/3.0/editPhone?key=public_key&sum=control_sum&idPhone=24552301&phone=380657412569&variables=test

Response:

{
   "result":{
      "successful":true
   }
} 
 

Looking up phone numbers in the Address Book

Method searchPhones() is used.
Arguments

searchFields

The “json” format object for the search. The search is possible through the following fields: “idAddressBook”, “phones”, “normalPhone”, “variables”, “status”. These operations can be used during the search: like,=,>,>=,<,<=. The example:

{
   "phone":{
      "operation":"like",
      "value":"38063%"
   }
}	  

from

To return the objects starting with the “from” position

offset

The number of objects to return

Request example:
URL: { "variables" : { "operation" : "like" , "value" : "иван%" } }">http://api.atompark.com/sms/3.0/searchPhones?key=public_key&sum=control_sum&searchFields={ "variables" : { "operation" : "like" , "value" : "иван%" } }

Response:

{
   "result":{
      "count":1,
      "fields":[
         "id",
         "idAddressBook",
         "phone",
         "normalPhone",
         "variables",
         "status",
         "code",
         "maid"
      ],
      "data":[
         [
            "24552295",
            "21597",
            "9999999999",
            "9999999999",
            "Иван Васильевич",
            "0",
            "",
            "0"
         ]
      ]
   }
} 
  
  

The exceptions operations.

The exception is the object composed of:
[id] => The identifier
[phone] =>The phone number
[added] => The adding date
[comment] => The description

     

To add the telephone number to the exceptions

Method addPhoneToExceptions() is used.
Arguments

idPhone

The phone identifier

phone

The phone number

reason

The reason of adding to the exceptions

To add the phone to the exceptions it is necessary to relay the phone identifier or the phone number.
Request example:
URL: http://api.atompark.com/sms/3.0/addPhoneToExceptions?key=public_key&sum=control_sum&idPhone=24552291&reason=test_add

Response:

{
   "result":{
      "exseption_id":24552302
   }
} 
 

The unique exception identifier exception_id will be returned in the response.

Deleting phone numbers from the exceptions

Method delPhoneFromExceptions() is used.
Arguments

idPhone

The phone identifier

phone

The phone number

idException

The exception identifier

To delete the telephone number it is necessary to relay one of these parameters.

Request example:
URL:http://api.atompark.com/sms/3.0/delPhoneFromExceptions?key=public_key&sum=control_sum&idPhone=24552291

Response:

{
   "result":{
      "successful":true
   }
} 

 

Editing phone numbers in the exceptions

Method editExceptions() is used.
Arguments

idException*

The exception identifier

reason*

The detailed reason of adding the phone to the exceptions

Request example:
URL: http://api.atompark.com/sms/3.0/delPhoneFromExceptions?key=public_key&sum=control_sum&idPhone=24552291

Response:

{
   "result":{

      "successful":true
   }
} 
  

Getting the exception object

Method getException() is used.
Arguments

idException

The exception identifier

phone

The phone number

idAddresbook

The Address Book identifier

from

To return the objects starting with the “from” position

offset

The number of objects to return

Request example:
URL: http://api.atompark.com/sms/3.0/delPhoneFromExceptions?key=public_key&sum=control_sum&idPhone=24552291

Response:

{
   "result":{
      "id":181042,
      "phone":"380692587852",
      "added":"2012-04-04 10:55:08",
      "comment":"testREASON_PHONE"
   }
} 
  
  

Request example:
URL:http://api.atompark.com/sms/3.0/getException?key=public_key&sum=control_sum&from=1&offset=2

Response:

{
   "result":{
      "count":6,
      "fields":[
         "id",
         "phone",
         "added",
         "comment"
      ],
      "data":[
         [
            "181038",
            "99999999999",
            "2012-03-12 10:44:31",
            "testREAS!!!"
         ],
         [
            "181042",
            "88888888888",
            "2012-04-04 10:55:08",
            "testREASON_PHONE"
         ]
      ]
   }
} 
  

Searching through exceptions

Method searchPhonesInExceptions() is used.
Arguments

searchFields

The “json” format object for the search. The search is possible through the next fields: “id”, “phone”, “date”, “descr”. These operations can be used during the search: like,=,>,>=,<,<=. The example

{
   "descr":{
      "operation":"like",
      "value":"testR%"
   }
} 
	  

from

To return the objects starting with the “from” position

offset

The number of objects to return

Request example:
URL: { "variables" : { "operation" : "like" , "value" : "иван%" } }"> http://api.atompark.com/sms/3.0/searchPhones?key=public_key&sum=control_sum&searchFields={ "variables" : { "operation" : "like" , "value" : "иван%" } }

Response:

{
   "result":{
      "count":6,
      "fields":[
         "id",
         "phone",
         "added",
         "comment"
      ],
      "data":[
         [
            "181041",
            "91234561",
            "2012-04-04 10:11:40",
            "testREASON_PHONE"
         ],
         [
            "181038",
            "74999404711",
            "2012-03-12 10:44:31",
            "testREASasdON!!!"
         ]
      ]
   }
} 
  
  

Checking the balance

Method getUserBalance() method is used.
Arguments

“currency”

the currency

“balance_currency”

– the balance in the chosen currency

Request example:
URL:http://api.atompark.com/sms/3.0/getUserBalance?key=public_key&sum=control_sum¤cy=USD

Response:

{
   "result":{
      "currency":"USD",
      "balance_currency":2.5
   }
} 

  

The sender name registration

Method registerSender() is used.
Arguments

name

The sender name. No more than 14 numerals for numeric sender ID, and no more than 11 symbols for textual sender ID.

country

The country to register the name in. Currently the following countries require sender ID registration: MD,UA.

Rquest example:
URL: http://api.atompark.com/sms/3.0/registerSender?key=public_key&sum=control_sum&name=qwerty&country=UA

Response:

{
   "name_id":748,
   "status":0
} 

The status in the “status” field will be returned in the response:
0 – pending approval
1 — approved
2 — denied

Getting the sender status

Method getSenderStatus() is used.
Arguments

idName

The sender name identifier

name

The sender name

country

The country

from

To return the objects starting with the “from” position

offset

The number of objects to return

To get the sender status it is necessary to transmit the sender name identifier or to transmit the sender name and the country. To get all the objects specify the offset.

Request example:
URL:http://api.atompark.com/sms/3.0/getSenderStatus?key=public_key&sum=control_sum&idName=747

or

URL: http://api.atompark.com/sms/3.0/getSenderStatus?key=public_key&sum=control_sum&name=qwerty&country=ua

Response:

{
   "result":{
      "id":747,
      "name":"qwerty",
      "status":"0",
      "country":"UA"
   }
}   
  

URL: http://api.atompark.com/sms/3.0/getSenderStatus?key=public_key&sum=control_sum&from=10&offset=2

Response:

{
   "result":{
      "count":661,
      "fields":[
         "id",
         "country",
         "name",
         "status",
         "description"
      ],
      "data":[
         [
            "11",
            "UA",
            "test",
            "1",
            ""
         ],
         [
            "12",
            "UA",
            "test1",
            "1",
            ""
         ]
      ]
   }
}   
  

 

Bulk sms operations

Creating a campaign

Method createCampaign() is used.
Arguments:

sender

The sender identifier

text

The text message content

list_id

The Address Book identifier

datetime

To send by parts – the number of sms per transaction

batch

To send by parts – the interval between the deliveries, minutes

batchinterval

To send by parts – the interval between the deliveries, minutes

sms_lifetime

Sms lifetime (0=maximum)

control_phone

The control phone number

userapp

The application ID

The “datetime” parameter is used if the campaign must be sent not immediately, but be scheduled. For the immediately delivery this parameter needs to be empty.

The example of date format during the parameter transmission – 2012-05-01 00:20:00

The “batch” and “batchinterval” parameters are used if the delivery needs to be sent by parts. If the delivery is planned by an iteration, the parameters must be transmitted with the 0 value.

The optional parameter “control_phone” is specified if the delivery quality control on the input phone is necessary. The phone number must be in the international standard format.

The additional parameter “userapp” can be used to identify the campaign source. If you want to know how many sms messages were sent via your application/module/service — specify its name into this parameter, the statistics will be available on request.
Attention! This parameter is not involved in the formation of a checksum.
It is better to transfer this parameter for creating campaign methods as following:
createcampaign
sendsms
sendsmsgroup

Request example:
URL: http://api.atompark.com/sms/3.0/createCampaign?key=public_key&sum=control_sum&sender=Info&text=Testing%20SMS&list_id=1234&datetime=&batch=0&batchinterval=0&sms_lifetime=0&controlnumber=

Response:

{
"result":{
"id":1853173,
"price":403.44
}
}
  

Where id is the created campaign identifier, price is the value of the delivery in the currency, specified in the user settings. –

Sending a single the text message to a particular phone number

Method sendSMS() is used.
Arguments:

sender

The sender identifier

text

the text message content

phone

The recipient phone number

datetime

To schedule the campaignя

sms_lifetime

The sms lifetime (0=maximum, 1, 6, 12, 24 hours)

The “datetime” parameter is used if it is necessary not to send the delivery immediately but to schedule it. For the immediately delivery just transmit the empty parameter. The example of date format during the parameter transmission – 2012-05-01 00:20:00

Request example:
URL: http://api.atompark.com/sms/3.0/sendSMS?key=public_key&sum=control_sum&sender=Info&text=Testing%20SMS&phone=380972920383&datetime=&sms_lifetime=0

Response:

{
"result":{
"id":1853174,
"price":0.13
}
}
 

Where id is the created campaign identifier, price is the value of the delivery in the currency, specified in the user settings.


Send SMS to a group

Method sendsmsgroup() is used.
Arguments:

sender*

Sender ID.

text*

message body.

phones*

phones in a JSON format  ["Phone number", "Variable"].
Example:[["3806316923xx","Sergey"],["3806316923xx","test"],["3806785214xx"],
["3806785214xx"]]'.

datetime*

delivery date and time

sms_lifetime *

sms lifetime

Request example:
URL: http://api.atompark.com/sms/3.0/sendsmsgroup?key=public_key&sum=control_sum&sender=senderid&text=text&datetime=2013-01-19 00:00:00&sms_lifetime=0&phones=[["3806316923xx","Sergey"],["3806316923xx","test"],["3806785214xx"],["3806785214xx"]]

Response:

{
   "result":{
      "id":9097982,
	  "price":0.5592,
	  "currency":"UAH"
   }
} 
 

Getting information over the campaign results

Method getCampaignInfo() is used.
Arguments:

id

The campaign identifier that was created by sendSMS() or createCampaign().

Request example:
URL: http://api.atompark.com/sms/3.0/getCampaignInfo?key=public_key&sum=control_sum&id=128891

Response:

{
"result":{
"sent":1,
"delivered":1,
"not_delivered":0,
"price":0.13,
"status":3
}
}
 

where:
sent – the number of sent text messages
delivered – the number of delivered text messages
not_delivered – the number of undelivered text messages
price – the price of all the campaign
status – the campaign state

The variable “status” can have such values:

0

The message is in the waiting line

1

There is no enough money to start the delivery

2

The delivery is in the progress

3

Sent

4

There are no valid recipient numbers

5

Partially sent

6

Spam

7

The recipient name is invalid

8

Pause

9

The delivery is scheduled

10

The campaign is pending manual approval

Getting the sms delivery statuses

Method getCampaignDeliveryStats() is used.
Arguments:

id

The campaign identifier that was created by sendSMS() or createCampaign().

datefrom

This parameter is not required. If it’s specified the statuses will be got after last “date from” upgrading.

Request example:
URL:http://api.atompark.com/sms/3.0/getCampaignDeliveryStats?key=public_key&sum=control_sum&id=128891

Response:

 
{
"result":{
"phone":[
"380972920383"
],
"sentdate":[
"0000-00-00 00:00:00"
],
"donedate":[
"0000-00-00 00:00:00"
],
"status":[
"0"
]
}
}  

where:
phone – the telephone package
sentdate –the time sending package
donedate – the last status setting package
status – the text message state package

The variables in “status” can be of such values:

0

In the waiting line

SENT

Sent

DELIVERED

Delivered

NOT_DELIVERED

Undelivered

INVALID_PHONE_NUMBER

Invalid recipient number

SPAM

Spam

If the field “sentdate” contains the value “0000-00-00 00:00:00” it means that a text message is still in the waiting line. As well, if “donedate” contains “0000-00-00 00:00:00” it means that the final status hasn’t been got from the operator.

Cancelling the delivery

Method cancelCampaign() is used.
Arguments:

id

The campaign identifier that was created by sendSMS() or createCampaign().

To cancel the delivery is possible only before it’s starting.
Request example:
URL: http://api.atompark.com/sms/3.0/cancelCampaign?key=public_key&sum=control_sum&id=128891

Response:


{
"result":{
"successful":1
}
}

Deleting the delivery

Method deleteCampaign() is used.
Arguments:

id

The campaign identifier that was created by sendSMS() or createCampaign().

Request example:
URL: http://api.atompark.com/sms/3.0/deleteCampaign?key=public_key&sum=control_sum&id=128891

Response:

{
"result":{
"successful":1
}
}
  

If the delivery has been already deleted, the response will contain an error message. The delivery can be deleted in spite of the current status.

Checking the campaign price according to the specified text message and the list

Method checkCampaignPrice() is used.
Arguments:

sender

The sender identifier

text

the text message content

list_id

The Address Book identifier

Request example:
URL:http://api.atompark.com/sms/3.0/checkCampaignPrice?key=public_key&sum=control_sum&sender=Info&text=Testing%20SMS&list_id=1234

Response:

{
"result":{
"price":1210.32
}
}

    


Get campaigns price

Method checkCampaignPriceGroup() is used.
Arguments:

sender*

sender ID.

text*

message body.

phones*

phones in a JSON format  ["Phone number", "Variable"].
Example:[["3806316923xx","Sergey"],["3806316923xx","test"],["3806785214xx"],
["3806785214xx"]]'.

Request example:
URL: http://api.atompark.com/sms/3.0/checkCampaignPriceGroup?key=public_key&sum=control_sum&sender=senderid&text=text&phones=[["3806316923xx","Sergey"],["3806316923xx","test"],["3806785214xx"],["3806785214xx"]]

Response:

{
   "result":{
      "price":0.5592,
	  "currency":"UAH"
   }
} 
 


Getting the list of campaigns

Method getCampaignList() is used
There are no Arguments.
Request example:
URL: http://api.atompark.com/sms/3.0/getCampaignList?key=public_key&sum=control_sum

Response:

{
"result":{
	"id": [
			"10012",
			"10013"
			],
"from": [
"Sender1",
"Sender2"
],
 "body": [
"Text of SMS1",
"Text of SMS2"
],
 "status" : [
3,
3
]
}
}
  

The field “status” has the same value as in the table for getCampaignInfo() option.


Get messages statuses due to campaigns

Method getcampaigndeliverystatsgroup() is used.
Arguments:

id*

campaigns IDs, comma-separated

Request example:
URL: http://api.atompark.com/sms/3.0/getcampaigndeliverystatsgroup?key=public_key&sum=control_sum&id=754,751

Response:

{
   "result":{
      "phone":["3806316923xx","3806316923xx"],
	  "sentdate":["0000-00-00 00:00:00","0000-00-00 00:00:00"],
	  "donedate":["0000-00-00 00:00:00","0000-00-00 00:00:00"],
	  "status":["0","0"],"id":[97659179,97659180]
   }
} 
 


Get task status

Method gettaskinfo() is used.
Arguments:

taskIds*

tasks IDs, comma-separated

Request example:
URL: http://api.atompark.com/sms/3.0/gettaskinfo?key=public_key&sum=control_sum&taskIds=97659003,97659005

Response:

{
   "result":[
   {
      "id":97659003,
	  "phone":"79503702408",
	  "country":0,
	  "parts":"1",
	  "sentdate":"2012-12-07 10:14:29"
	  "donedate":"0000-00-00 00:00:00",
	  "price":0.123,
	  "status":"0",
	  "variable":"",
	  "currency":"UAH"
   }
   {
	  "id":97659005,
      "phone":"79503703937"
	  "country":0,
	  "parts":"1"
	  "sentdate":"2012-12-07 10:14:29"
	  "donedate":"0000-00-00 00:00:00"
	  "price":0.123,
	  "status":"0",
	  "variable":"",
	  "currency":"UAH"
	}
	]
} 
 

Developers who need additional free SMS for testing please email us at 911@atompark.com